|
Record of Construction and Equipment for Oil Tankers
|
| in respect of the provisions of Annex I of the
International Convention for the Prevention of Pollution from Ships,
1973, as modified by the Protocol of 1978 relating thereto (hereinafter
referred to as "the Convention").
|
| Notes:
1 This form is to be used for the first
two types of ships as categorized in the IOPP Certificate, i.e. "oil
tankers" and "ships other than oil tankers with cargo tanks coming
under regulation 2.2 of Annex I of the Convention". For the third type
of ships as categorized in the IOPP Certificate, Form A shall be
used.
2 This Record shall be permanently
attached to the IOPP Certificate. The IOPP Certificate shall be
available on board the ship at all times.
3 The language of the original Record
shall be at least in English, French or Spanish. If an official
language of the issuing country is also used, this shall prevail in
case of a dispute or discrepancy.
4 Entries in boxes shall be made by
inserting either a cross (x) for the answers "yes" and "applicable" or
a dash (-) for the answers "no" and "not applicable" as
appropriate.
5 Unless otherwise stated, regulations
mentioned in this Record refer to regulations of Annex I of the
Convention and resolutions refer to those adopted by the International
Maritime Organization.
|
|
1.Particulars of ship
|
|
|
1.1 Name of ship
....................................................................
|
|
|
1.2 Distinctive number or letters
............................................
|
|
|
1.3 Port of registry
..................................................................
|
|
|
1.4 Gross tonnage
.................................................................
|
|
|
1.5 Carrying capacity of ship
......................................... (m3)
|
|
|
1.6 Deadweight of ship .................
(tonnes) (regulation 1.23)
|
|
|
1.7 Length of ship
................................. (m) (regulation 1.19)
|
|
|
1.8 Date of build:
|
|
|
1.8.1 Date of building contract
..........................................
|
|
|
1.8.2 Date on which keel was laid or ship was at
a similar stage of construction
..............................................................................
|
|
|
1.8.3 Date of delivery
........................................................
|
|
|
1.9 Major conversion (if applicable):
|
|
|
1.9.1 Date of conversion contract
....................................
|
|
|
1.9.2 Date on which conversion was commenced
..........
|
|
|
1.9.3 Date of completion of conversion
............................
|
|
|
1.10 Unforeseen delay in delivery:
|
|
|
1.10.1 The ship has been accepted by the
Administration as a "ship delivered on or before 31 December 1979"
under regulation 1.28.1 due to unforeseen delay in delivery
|
|
|
1.10.2 The ship has been accepted by the
Administration as an "oil tanker delivered on or before 1 June 1982"
under regulation 1.28.3 due to unforeseen delay in delivery
|
|
|
1.10.3 The ship is not required to comply with
the provisions of regulation 26 due to unforeseen delay in
delivery
|
|
|
1.11 Type of ship:
|
|
|
1.11.1 Crude oil tanker
|
|
|
1.11.2 Product carrier
|
|
|
1.11.3 Product carrier not carrying fuel oil or
heavy diesel oil as referred to in regulation 20.2, or lubricating
oil
|
|
|
1.11.4 Crude oil/product carrier
|
|
|
1.11.5 Combination carrier
|
|
|
1.11.6 Ship, other than an oil tanker, with
cargo tanks coming under regulation 2.2 of Annex I of the
Convention
|
|
|
1.11.7 Oil tanker dedicated to the carriage of
products referred to in regulation 2.4
|
|
|
2. Equipment for the control of oil discharge from
machinery space bilges and oil fuel tanks(regulations 16 and
14)
|
|
|
2.1 Carriage of ballast water in oil fuel
tanks:
|
|
|
2.1.1 The ship may under normal conditions carry
ballast water in oil fuel tanks
|
|
|
2.2 Type of oil filtering equipment fitted:
|
|
|
2.2.1 Oil filtering (15 ppm)
equipment(regulation 14.6)
|
|
|
2.2.2 Oil filtering (15 ppm) equipment with
alarm and automatic stopping device(regulation 14.7)
|
|
|
2.3 Approval standards:footnote
|
|
|
2.3.1 The separating/filtering equipment:
|
|
| .1
|
has been approved in accordance with resolution
A.393(X);
|
|
| .2
|
has been approved in accordance with resolution
MEPC.60(33);
|
|
| .3
|
has been approved in accordance with resolution
MEPC.107(49);
|
|
| .4
|
has been approved in accordance with resolution
A.233(VII);
|
|
| .5
|
has been approved in accordance with national
standards not based upon resolution A.393(X) or A.233(VII);
|
|
| .6
|
has not been approved.
|
|
|
2.3.2 The process unit has been approved in
accordance with resolution A.444(XI)
|
|
|
2.3.3 The oil content meter:
|
|
| .1
|
has been approved in accordance with resolution
A.393(X);
|
|
| .2
|
has been approved in accordance with resolution
MEPC.60(33);
|
|
| .3
|
has been approved in accordance with resolution
MEPC.107(49)
|
|
|
2.4 Maximum throughput of the system is
............................. m3/h.
|
|
|
2.5 Waiver of regulation 14:
|
|
|
2.5.1 The requirements of regulation 14.1 or
14.2 are waived in respect of the ship in accordance with regulation
14.5.
The ship is engaged exclusively on voyages within special
area(s):
....................................................................................
|
|
|
2.5.2 The ship is fitted with holding tank(s)
for the total retention on board of all oily bilge water as follows
:
|
|
|
Tank identification
|
Tank location
|
Volume(m3)
|
|
|
Frames(from) – (to)
|
Lateral position
|
|
|
|
|
|
|
|
|
|
|
Total volume: ...................... m3
|
|
|
|
|
|
|
|
|
2.5.3 In lieu of the holding tank(s) the ship is
provided with arrangements to transfer bilge water to the slop
tank
|
|
|
2A.1 The ship is required to be constructed
according to regulation 12A and complies with the requirements of:
|
|
|
|
paragraphs 6 and either 7 or 8 (double hull
construction)
|
|
|
|
paragraph 11 (accidental oil fuel outflow
performance).
|
|
|
2A.2 The ship is not required to comply with the
requirements of regulation 12A.
|
|
|
3. Means for retention and disposal of oil residues
(sludge) (regulation 12) and oily bilge water holding tank(s)
footnote
|
|
|
3.1 The ship is provided with oil residue
(sludge) tanks for retention of oil residues (sludge) on board as
follows:
|
|
|
Tank identification
|
Tank location
|
Volume
(m3)
|
|
|
Frames(from) – (to)
|
Lateral position
|
|
|
|
|
|
|
|
|
|
|
Total volume: ...................... m3
|
|
|
|
|
|
|
|
|
3.2 Means for the disposal of oil residues
(sludge) retained in oil residue (sludge) tanks:
|
|
|
3.2.1 Incinerator for oil residues
(sludge)................................................
|
|
|
3.2.2 Auxiliary boiler suitable for burning oil
residues (sludge) ..................................
|
|
|
3.2.3 Other acceptable means, state which
........................................
|
|
|
3.3 The ship is provided with holding tank(s)
for the retention on board of oily bilge water as follows:
|
|
|
Tank identification
|
Tank location
|
Volume (m3)
|
|
|
Frames(from) – (to)
|
Lateral position
|
|
|
|
|
|
|
|
|
|
|
Total volume: ...................... m3
|
|
|
|
|
|
|
|
|
4. Standard discharge connection(regulation 13)
|
|
|
4.1 The ship is provided with a pipeline for the
discharge of residues from machinery bilges to reception facilities,
fitted with a standard discharge connection in accordance with
regulation 13
|
|
|
5. Construction(regulations 18, 19, 20, 23, 26, 27 and
28)
|
|
|
5.1 In accordance with the
requirements of regulation 18, the ship is qualified as a segregated
ballast tanker in compliance with regulation
18.9……………………………………………………………….…
|
|
|
5.2 Segregated ballast tanks (SBT) in compliance
with regulation 18 are distributed as follows:
|
|
|
Tank
|
Volume (m3)
|
Tank
|
Volume (m3)
|
|
|
|
|
|
|
|
|
Total volume: ...................... m3
|
|
|
|
|
|
|
|
|
5.3 Crude oil washing (COW):
|
|
|
5.3.1 The ship is equipped with a COW system in
compliance with regulation 33
|
|
|
5.3.2 The ship is equipped with a COW system in
compliance with regulation 33 except that the effectiveness of the
system has not been confirmed in accordance with regulation 33.1 and
paragraph 4.2.10 of the Revised COW Specifications (resolution
A.446(XI) as amended by resolutions A.497(XII) and A.897(21))
|
|
|
5.3.3 The ship has been supplied with a valid
Crude Oil Washing Operations and Equipment Manual which is dated
............................
|
|
|
5.3.4 The ship is not required to be but is
equipped with COW in compliance with the safety aspects of the Revised
COW Specifications (resolution A.446(XI) as amended by resolutions
A.497(XII) and A.897(21))
|
|
|
5.4 Limitation of size and arrangements of cargo
tanks (regulation 26):
|
|
|
5.4.1 The ship is required to be constructed
according to, and complies with, the requirements of regulation 26
|
|
|
5.4.2 The ship is required to be constructed
according to, and complies with, the requirements of regulation 26.4
(see regulation 2.2)
|
|
|
5.5 Subdivision and stability (regulation
28):
|
|
|
5.5.1 The ship is required to be constructed
according to, and complies with, the requirements of regulation 28
|
|
|
5.5.2 Information and data required under
regulation 28.5 have been supplied to the ship in an approved form
|
|
|
5.5.3 The ship is required to be constructed
according to, and complies with, the requirements of regulation 27
|
|
|
5.5.4 Information and data required under
regulation 27 for combination carriers have been supplied to the ship
in a written procedure approved by the Administration
|
|
|
5.5.5 The ship is provided with an Approved
Stability Instrument in accordance with regulation
28(6)...…………………………………………..…………
|
|
|
5.5.6 The requirements of regulation 28(6) are
waived in respect of the ship in accordance with regulation 3.6.
Stability is verified by one or more of the following means:
|
|
| .1
|
loading only to
approved conditions defined in the stability information provided to the
master in accordance with regulation 28(5)……………………………………………………….
|
|
| .2
|
verification is
made remotely by a means approved by the
Administration:………………………………………………………..
|
|
| .3
|
loading within
an approved range of loading conditions defined in the stability
information provided to the master in accordance with regulation
28(5)….………………………….……………….……….
|
|
| .4
|
loading in
accordance with approved limiting KG/GM curves covering all applicable
intact and damage stability requirements defined in the stability
information provided to the master in accordance with regulation 28(5)
………....................................
|
|
|
5.6 Double-hull construction:
|
|
|
5.6.1 The ship is required to be constructed
according to regulation 19 and complies with the requirements of:
|
|
| .1
|
paragraph 3 (double-hull construction)
|
|
| .2
|
paragraph 4 (mid-height deck tankers with double
side construction)
|
|
| .3
|
paragraph 5 (alternative method approved by the
Marine Environment Protection Committee)
|
|
|
5.6.2 The ship is required to be constructed
according to and complies with the requirements of regulation 19.6
|
|
|
5.6.3 The ship is not required to comply with
the requirements of regulation 19
|
|
|
5.6.4 The ship is subject to regulation 20
and:
|
|
| .1
|
is required to comply with paragraphs 2 to 5, 7 and
8 of regulation 19 and regulation 28 in respect of paragraph 28.7 not
later than
..........................................................................
|
|
| .2
|
is allowed to continue operation in accordance with
regulation 20.5 until
................................................................
|
|
| .3
|
is allowed to continue operation in accordance with
regulation 20.7 until
................................................................
|
|
|
5.6.5 The ship is not subject to regulation 20
(check which box(es) apply):
|
|
| .1
|
The ship is less than 5,000 tonnes
deadweight
|
|
| .2
|
The ship complies with regulation 20.1.2
|
|
| .3
|
The ship complies with regulation 20.1.3
|
|
|
5.6.6 The ship is subject to regulation 21
and:
|
|
| .1
|
is required to comply with regulation 21.4 not
later
than................................................................................................
|
|
| .2
|
is allowed to continue operation in accordance with
regulation 21.5
until................................................................................................
|
|
| .3
|
is allowed to continue operation in accordance with
regulation 21.6.1
until................................................................................................
|
|
| .4
|
is allowed to continue operation in accordance with
regulation 21.6.2
until................................................................................................
|
|
| .5
|
is exempted from the provisions of regulation 21 in
accordance with regulation 21.7.2
|
|
|
5.6.7 The ship is not subject to regulation 21
(check which box(es) apply):
|
|
| .1
|
The ship is less than 600 tonnes deadweight
|
|
| .2
|
The ship complies with regulation 19 (Deadweight
tonnes ≥ 5,000)
|
|
| .3
|
The ship complies with regulation 21.1.2
|
|
| .4
|
The ship complies with regulation 21.4.2 (600 ≤
Deadweight tonnes < 5,000)
|
|
| .5
|
The ship does not carry “heavy grade oil” as
defined in regulation 21.2 of MARPOL Annex I
|
|
|
5.6.8 The ship is subject to regulation 22
and:
|
|
| .1
|
complies with the requirements of regulation
22.2
|
|
| .2
|
complies with the requirements of regulation
22.3
|
|
| .3
|
complies with the requirements of regulation
22.5
|
|
|
5.6.9 The ship is not subject to regulation
22
|
|
|
5.7 Accidental oil outflow performance:
|
|
|
5.7.1 The ship complies with the requirements of
regulation 23
|
|
|
6. Retention of oil on board (regulations 29, 31 and
32)
|
|
|
6.1 Oil discharge monitoring and control
system:
|
|
|
6.1.1 The ship comes under category
.............. oil tanker as defined in resolution A.496(XII) or
A.586(14)footnote
(delete as appropriate)
|
|
|
6.1.2 The oil discharge monitoring and control
system has been approved in accordance with resolution
MEPC.108(49)
|
|
|
6.1.3 The system comprises:
|
|
| .1
|
control unit
|
|
| .2
|
computing unit
|
|
| .3
|
calculating unit
|
|
|
6.1.4 The system is:
|
|
| .1
|
fitted with a starting interlock
|
|
| .2
|
fitted with automatic stopping device
|
|
|
6.1.5 The oil content meter is approved under
the terms of resolution A.393(X) or A.586(14) or MEPC.108(49) footnote
(delete as appropriate) suitable for:
|
|
| .1
|
crude oil
|
|
| .2
|
black products
|
|
| .3
|
white products
|
|
|
6.1.6 The ship has been supplied with an
operations manual for the oil discharge monitoring and control
system
|
|
|
6.2 Slop tanks:
|
|
|
6.2.1 The ship is provided with
.............................. dedicated slop tank(s) with the total
capacity of .............................. m3, which is
..............................% of the oil carrying capacity, in
accordance with:
|
|
| .1
|
regulation 29.2.3
|
|
| .2
|
regulation 29.2.3.1
|
|
| .3
|
regulation 29.2.3.2
|
|
| .4
|
regulation 29.2.3.3
|
|
|
6.2.2 Cargo tanks have been designated as slop
tanks
|
|
|
6.3 Oil/water interface detectors:
|
|
|
6.3.1 The ship is provided with oil/water
interface detectors approved under the terms of resolution
MEPC.5(XIII)footnote
|
|
|
6.4 Exemptions from regulations 29, 31 and
32:
|
|
|
6.4.1 The ship is exempted from the requirements
of regulations 29, 31 and 32 in accordance with regulation 2.4
|
|
|
6.4.2 The ship is exempted from the requirements
of regulations 29, 31 and 32 in accordance with regulation 2.2
|
|
|
6.5 Waiver of regulations 31 and 32:
|
|
|
6.5.1 The requirements of regulations 31 and 32
are waived in respect of the ship in accordance with regulation 3.5.
The ship is engaged exclusively on:
|
|
| .1
|
specific trade under regulation 2.5:
................................................................................................................................................................................................
|
|
| .2
|
voyages within special area(s):
................................................................................................................................................................................................
|
|
| .3
|
voyages within 50 nautical miles of the nearest
land outside special area(s) of 72 hours or less in duration restricted
to:
................................................................................................................................................................................................
|
|
|
7. Pumping, piping and discharge arrangements
(regulation 30)
|
|
|
7.1 The overboard discharge outlets for
segregated ballast are located:
|
|
|
7.1.1 Above the waterline
|
|
|
7.1.2 Below the waterline
|
|
|
7.2 The overboard discharge outlets, other than
the discharge manifold, for clean ballast are locatedfootnote:
|
|
|
7.2.1 Above the waterline
|
|
|
7.2.2 Below the waterline
|
|
|
7.3 The overboard discharge outlets, other than
the discharge manifold, for dirty ballast water or oil-contaminated
water from cargo tank areas are located:footnote
|
|
|
7.3.1 Above the waterline
|
|
|
7.3.2 Below the waterline in conjunction with the
part flow arrangements in compliance with regulation 30.6.5
|
|
|
7.3.3 Below the waterline
|
|
|
7.4 Discharge of oil from cargo pumps and oil
lines (regulations 30.4 and 30.5):
|
|
|
7.4.1 Means to drain all cargo pumps and oil
lines at the completion of cargo discharge:
|
|
| .1
|
drainings capable of being discharged to a cargo
tank or slop tank
|
|
| .2
|
for discharge ashore a special small-diameter line
is provided
|
|
|
8. Shipboard oil/marine pollution emergency plan
(regulation 37)
|
|
|
8.1 The ship is provided with a shipboard oil
pollution emergency plan in compliance with regulation 37
|
|
|
8.2 The ship is provided with a shipboard marine
pollution emergency plan in compliance with regulation 37.3
|
|
|
8A. Ship-to-ship oil transfer operations at sea
(regulation 41)
|
|
|
8A.1 The oil tanker is provided with an STS
operations Plan in compliance with regulation 41.
|
|
|
9. Exemption
|
|
|
9.1 Exemptions have been granted by the
Administration from the requirements of chapter 3 of Annex I of the
Convention in accordance with regulation 3.1 on those items listed
under
paragraph(s)..........................................................................................................................................................................................................................................................................................................................................................
of this Record
|
|
|
10. Equivalents (regulation 5)
|
|
|
10.1 Equivalents have been approved by the
Administration for certain requirements of Annex I on those items
listed under paragraph(s)
....................................................................................................
of this Record
|
|
|
11. Compliance with part II-A – chapter 1 of the Polar
Code
|
|
|
11.1 The ship is in compliance with additional
requirements in the environment-related provisions of the introduction
and section 1.2 of chapter I of part II-A of the Polar Code.
|
|
|
|
|
|
|
|
| THIS IS TO CERTIFY that this Record is correct in
all respects.Issued at
..............................................................................................................................
|
|
(Place of issue of the Record)
|
|
|
|
|
|
|
|
(dd/mm/yyyy):
...........................................................
|
....................................................................
|
|
(Date of issue)
|
(Signature of duly authorized official issuing the Record)
|
|
|
|
|
|
|
|
(Seal or stamp of the issuing authority, as appropriate)
|