(Model form of Certificate of Fitness for the Carriage of Dangerous Chemicals in
Bulk)
APPENDIX
MODEL FORM OF CERTIFICATE OF FITNESS FOR THE CARRIAGE OF DANGEROUS CHEMICALS IN
BULK
1 The existing paragraph 6 is replaced by the following:
"6 That the loading and stability manuals required by paragraph 2.2.1.1 of the Code
have been supplied to the ship in an approved form."
2 A new paragraph 7 is added as follows:
"7 That the ship must be loaded:
-
.1footnote only in accordance with loading conditions
verified compliant with intact and damage stability requirements using the
approved stability instrument fitted in accordance with paragraph 2.2.1.2 of
the Code;
-
.2footnote where a waiver permitted by paragraph 2.2.1.3
of the Code is granted and the approved stability instrument required by
paragraph 2.2.1.2 of the Code is not fitted, loading should be made in
accordance with one or more of the following approved methods:
-
(i)footnote in accordance with the loading
conditions provided in the approved loading and stability manuals
referred to in 6 above; or
-
(ii)footnote in accordance with loading conditions
verified remotely using an approved means ………..……; or
-
(iii)footnote in accordance with a loading condition
which lies within an approved range of conditions defined in the
approved loading and stability manuals referred to in 6 above; or
-
(iv)footnote in accordance with a loading condition
verified using approved critical KG/GM data defined in the approved
loading and stability manuals referred to in 6 above; and
-
.3footnote in accordance with the loading limitations
appended to this Certificate.
Where it is required to load the ship other than in accordance with the above
instruction, then the necessary calculations to justify the proposed loading
conditions should be communicated to the certifying Administration who may
authorize in writing the adoption of the proposed loading condition.footnote