4.1 Model tasin
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Circulars - Maritime Safety Committee - MSC.1/Circular.1227 – Explanatory Notes to the Interim Guidelines for Alternative Assessment of the Weather Criterion – (11 January 2007) - Annex - Explanatory Notes to the Interim Guidelines for Alternative Assessment of the Weather Criterion - 4The determination of the roll angle Φ1 - 4.1Model tasin

4.1 Model tasin

 The model basin used for roll decay tests and rolling motion tests in waves was the same used for the drifting tests (50 m in length, 8 m in breadth and 4.5 m in depth). The overall length of the model (2.14 m) was small enough compared to the breadth of the basin.

Parent topic: 4 The determination of the roll angle Φ 1
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.