Annex – Guidance Notes for the Harmonized Implementation of the Revised Guidelines and Specification for Pollution Prevention Equipment for Machinery Space Bilges of Ships (Resolution MEPC.107(49)) During the Type Approval Process
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Circulars - Marine Environment Protection Committee - MEPC.1/Circular.643 – Harmonized Implementation of the Revised Guidelines and Specifications for Pollution Prevention Equipment for Machinery Space Bilges of Ships During the Type-Approval Process – (12 November 2008) - Annex – Guidance Notes for the Harmonized Implementation of the Revised Guidelines and Specification for Pollution Prevention Equipment for Machinery Space Bilges of Ships (Resolution MEPC.107(49)) During the Type Approval Process

Annex – Guidance Notes for the Harmonized Implementation of the Revised Guidelines and Specification for Pollution Prevention Equipment for Machinery Space Bilges of Ships (Resolution MEPC.107(49)) During the Type Approval Process

 The requirements set out in paragraphs 4.1.5, 1.2.9.6 (Part 1), 3.2.2.3 (Part 3) and test result diagrams (Appendix to Appendix 1) of the Revised Guidelines are open to different interpretations. In order to ensure the uniform application of these requirements, the following Guidance notes for harmonized implementation, set out in italics, should be followed:


Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.