PARAGRAPH 1.2.9.6 OF PART 1
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Circulars - Marine Environment Protection Committee - MEPC.1/Circular.643 – Harmonized Implementation of the Revised Guidelines and Specifications for Pollution Prevention Equipment for Machinery Space Bilges of Ships During the Type-Approval Process – (12 November 2008) - Annex – Guidance Notes for the Harmonized Implementation of the Revised Guidelines and Specification for Pollution Prevention Equipment for Machinery Space Bilges of Ships (Resolution MEPC.107(49)) During the Type Approval Process - PARAGRAPH 1.2.9.6 OF PART 1

PARAGRAPH 1.2.9.6 OF PART 1

 According to paragraph 1.2.9.6 of Part 1 of the Annex to the revised Guidelines a test lasting a minimum of 2 h should be carried out to check that the 15 ppm bilge separator will operate continuously and automatically.

Parent topic: Annex – Guidance Notes for the Harmonized Implementation of the Revised Guidelines and Specification for Pollution Prevention Equipment for Machinery Space Bilges of Ships (Resolution MEPC.107(49)) During the Type Approval Process
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.