Section 3 Service area factors
Clasification Society 2024 - Version 9.40
Clasifications Register Rules and Regulations - Rules and Regulations for the Classification of Naval Ships, January 2023 - Volume 1 Ship Structures - Part 3 Design Principles and Constructional Arrangements - Chapter 5 Anchoring, Mooring, Towing, Berthing, Launching, Recovery and Docking - Section 3 Service area factors

Section 3 Service area factors

Parent topic: Chapter 5 Anchoring, Mooring, Towing, Berthing, Launching, Recovery and Docking

3.1 General

3.1.1 For details of the service areas referred to in this Section, see Vol 1, Pt 5, Ch 2, 2.2 Service areas.

3.2 Service Areas SA1, SA2, SA3, SA4, SAR

3.2.1 For ships designed to operate in any service area, the equipment is to be in accordance with the requirements of Table 5.4.1 Equipment - HHP Bower anchors and chain cables and Table 5.6.1 Equipment - Kedge anchors and wires, towlines and mooring lines

3.2.2 For ships operating in service areas SA4 and SAR, the equipment may be specially considered accounting for the environmental condition for the anticipated service, i.e. wind speed, current and water depth.

Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.